The specs of a Gateway 2000 computer are appropriate for running Windows 95, 98, 98SE and ME. By today's standards, the Gateway 2000 specs are obsolete, but it will still run early Windows OSs.
Processor
Gateway Solo Info This Forum brought to you by Glory Computers We sell Gateway Solo parts on Ebay under userid gatewaydeals.
The processor of a Gateway 2000 computer is an Intel 266MHz Pentium II Processor with 512k cache. This is a tenth the power of the laptops of 2010 and about the same processor speed as your typical cell phone in 2010.
Random Access Memory (RAM)
The RAM of a Gateway 2000 is 128MB SDRAM. SDRAM is not to be confused with DIMMS memory, which is faster and more reliable than its predecessor.
Graphics Card
The graphics card of a Gateway 2000 computer is an AccelGraphics Permedia 2 AGP 8MB Video Card. 8MB is a powerful graphics card and means this machine was very good with PC games of its time, such as Myst.
Hard Drive
The hard drive of a Gateway 2000 computer is a 6.4GB Ultra ATA hard drive. One full HD DVD consists of about 6.4 GB.
Video of the Day
- processor image by Orlando Florin Rosu from Fotolia.com
More Articles
Replace the BIOS battery on a Gateway Solo 2500 series laptop to resolve issues regarding lost date and time when the system boots, or to maintain the hardware configuration settings stored in BIOS. The Solo 2500 series uses a battery pack that is attached to the motherboard with a small two-wire connector. The battery pack is typically located under the motherboard, making this operation rather challenging compared with many laptops inside which the battery pack is easily accessible.
Instructions
Gateway Solo 2500 Bios Update
- 1
Create a backup of the computer before attempting this operation to avoid data loss.
2
Power down the computer, disconnect the power cord and remove the battery pack.
3
Remove the memory and hard drive access covers and inspect for the battery pack, which is sometimes in these areas.
4
Remove the keyboard by gently prying up the corners of the keyboard, one corner at a time, and disengaging the small, delicate tabs that hold the keyboard in place. Lift the keyboard up about an inch or less to avoid disconnecting the small ribbon cable that connects it to the motherboard. Remove screws from the bottom of the laptop if the keyboard does not release by prying free the keyboard. Some models are screwed into place and not held by tabs.
5
Remove the BIOS battery pack and replace it with the new one. Replace the keyboard and any screws or covers removed during the process. Replace the main battery and connect the power cord. Set the date and time during the first boot routine.